|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
MUR2100E Preferred Device SWITCHMODETM Power Rectifier Ultrafast "E" Series with High Reverse Energy Capability . . . designed for use in switching power supplies, inverters and as free wheeling diodes, these state-of-the-art devices have the following features: http://onsemi.com * 20 mjoules Avalanche Energy Guaranteed * Excellent Protection Against Voltage Transients in Switching * * * * * * Inductive Load Circuits Ultrafast 75 Nanosecond Recovery Time 175C Operating Junction Temperature Low Forward Voltage Low Leakage Current High Temperature Glass Passivated Junction These are Pb-Free Devices ULTRAFAST RECTIFIER 2 AMPS 1000 VOLTS Mechanical Characteristics * Case: Epoxy, Molded * Weight: 0.4 gram (approximately) * Finish: All External Surfaces Corrosion Resistant and Terminal * * Leads are Readily Solderable Lead and Mounting Surface Temperature for Soldering Purposes: 220C Max. for 10 Seconds, 1/16 from case Polarity: Cathode Indicated by Polarity Band Rating Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage Average Rectified Forward Current (Note 1) Non-Repetitive Peak Surge Current (Surge applied at rated load conditions, halfwave, single phase, 60 Hz) Operating Junction Temperature and Storage Temperature Range Symbol VRRM VRWM VR IF(AV) IFSM Value 1000 Unit V MUR 2100E 2.0 @ TA = 35C 35 A MUR2100E = Device Code A AXIAL LEAD PLASTIC CASE 059 MAXIMUM RATINGS MARKING DIAGRAM TJ, Tstg -65 to +175 C ORDERING INFORMATION Device MUR2100E Package Axial Lead (Pb-Free) Axial Lead (Pb-Free) Shipping 1000 Units/Bag THERMAL CHARACTERISTICS Characteristic Maximum Thermal Resistance, Junction-to-Ambient Symbol RqJA Value (Note 1) Unit C/W MUR2100ERL 5000/Tape & Reel Maximum ratings are those values beyond which device damage can occur. Maximum ratings applied to the device are individual stress limit values (not normal operating conditions) and are not valid simultaneously. If these limits are exceeded, device functional operation is not implied, damage may occur and reliability may be affected. 1. Pulse Test: Pulse Width = 300 ms, Duty Cycle 2.0%. For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. Preferred devices are recommended choices for future use and best overall value. (c) Semiconductor Components Industries, LLC, 2004 1 July, 2004 - Rev. 4 Publication Order Number: MUR2100E/D MUR2100E ELECTRICAL CHARACTERISTICS Characteristic Maximum Instantaneous Forward Voltage (Note 2) (IF = 2.0 A, TJ = 150C) (IF = 2.0 A, TJ = 25C) Maximum Instantaneous Reverse Current (Note 2) (Rated dc Voltage, TJ = 100C) (Rated dc Voltage, TJ = 25C) Maximum Reverse Recovery Time (IF = 1.0 A, di/dt = 50 A/ms) (IF = 0.5 A, IR = 1.0 A, IREC = 0.25 A) Maximum Forward Recovery Time (IF = 1.0 A, di/dt = 100 A/ms, IREC to 1.0 V) Controlled Avalanche Energy (See Test Circuit in Figure 6) 2. Pulse Test: Pulse Width = 300 ms, Duty Cycle 2.0%. Symbol VF 1.75 2.20 iR 600 10 trr 100 75 tfr WAVAL 75 10 ns mJ ns mA Value Unit V 10 IF, INSTANTANEOUS FORWARD CURRENT (A) VF @ 175C IF, INSTANTANEOUS FORWARD CURRENT (A) 10 VF @ 175C 100C 1.0 150C 100C 25C 1.0 150C 25C 0.1 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 0.1 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 VF, INSTANTANEOUS VOLTAGE (V) VF, INSTANTANEOUS VOLTAGE (V) Figure 1. Maximum Forward Voltage Figure 2. Typical Forward Voltage http://onsemi.com 2 MUR2100E 1.0E-01 1.0E-01 IR, REVERSE CURRENT (A) 1.0E-03 150C 1.0E-04 1.0E-05 1.0E-06 1.0E-07 1.0E-08 IR, REVERSE CURRENT (A) 1.0E-02 VR @ 175C 1.0E-02 1.0E-03 100C VR @ 175C 1.0E-04 150C 1.0E-05 25C 100C 1.0E-06 1.0E-07 25C 1.0E-08 0 200 400 600 800 1000 0 200 400 600 800 1000 VR, REVERSE VOLTAGE (V) VR, REVERSE VOLTAGE (V) Figure 3. Maximum Reverse Current 4.0 3.5 3.0 2.5 2.0 1.5 1.0 0.5 0 0 50 100 150 200 TA, AMBIENT TEMPERATURE (C) SQUARE WAVE DC PF(AV), AVERAGE POWER DISSIPATION (A) IF(AV), AVERAGE FORWARD CURRENT (A) 4 Figure 4. Typical Reverse Current 3 2 SQUARE WAVE DC 1 0 0 0.5 1 1.5 2 2.5 IF(AV), AVERAGE FORWARD CURRENT (A) Figure 5. Current Derating Figure 6. Power Dissipation 100 C, CAPACITANCE (pF) 10 1 0 20 40 60 80 100 120 140 160 180 200 VR, REVERSE VOLTAGE (V) Figure 7. Typical Capacitance http://onsemi.com 3 MUR2100E NOTE 1 -- AMBIENT MOUNTING DATA Data shown for thermal resistance junction to ambient (RqJA) for the mountings shown is to be used as typical guideline values for preliminary engineering or in case the tie point temperature cannot be measured. TYPICAL VALUES FOR RqJA IN STILL AIR Mounting Method 1 2 RqJA 3 Lead Length, L 1/4 1/2 1/8 52 65 72 67 80 87 50 Units C/W C/W C/W MOUNTING METHOD 1 L L EEEEEEEEEEEE EEEEEEEEEEEE Vector Pin Mounting MOUNTING METHOD 3 EEEEEEEEEEE MOUNTING METHOD 2 L L EE EE EE EE EE EE EE L = 3/8 Board Ground Plane P.C. Board with 1-1/2 X 1-1/2 Copper Surface http://onsemi.com 4 MUR2100E PACKAGE DIMENSIONS AXIAL LEAD (DO-41) CASE 59-10 ISSUE S NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. 59-04 OBSOLETE, NEW STANDARD 59-09. 4. 59-03 OBSOLETE, NEW STANDARD 59-10. 5. ALL RULES AND NOTES ASSOCIATED WITH JEDEC DO-41 OUTLINE SHALL APPLY 6. POLARITY DENOTED BY CATHODE BAND. 7. LEAD DIAMETER NOT CONTROLLED WITHIN F DIMENSION. DIM A B D F K INCHES MIN MAX 0.161 0.205 0.079 0.106 0.028 0.034 --- 0.050 1.000 --- MILLIMETERS MIN MAX 4.10 5.20 2.00 2.70 0.71 0.86 --- 1.27 25.40 --- B K F D A F K http://onsemi.com 5 MUR2100E SWITCHMODE is a trademark of Semiconductor Components Industries, LLC. ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. "Typical" parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 61312, Phoenix, Arizona 85082-1312 USA Phone: 480-829-7710 or 800-344-3860 Toll Free USA/Canada Fax: 480-829-7709 or 800-344-3867 Toll Free USA/Canada Email: orderlit@onsemi.com N. American Technical Support: 800-282-9855 Toll Free USA/Canada Japan: ON Semiconductor, Japan Customer Focus Center 2-9-1 Kamimeguro, Meguro-ku, Tokyo, Japan 153-0051 Phone: 81-3-5773-3850 ON Semiconductor Website: http://onsemi.com Order Literature: http://www.onsemi.com/litorder For additional information, please contact your local Sales Representative. http://onsemi.com 6 MUR2100E/D |
Price & Availability of MUR2100ERL |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |